Now the battery stuff was all hooked up, it was time to install the water pump.

First I ran some tubing from both the tanks, and put on a Y connector, then I ran it to a stepdown adapter (from 3/4″ to 1/2″) and then to the pump. From there I ran it to the accumulator tank.

IMG_20140713_172315

I also fused the pump with a 15amp fuse.

When it’s finished the setup will look like this (pic credit to Don Casey)

diagram

 

Just with two tanks, and more filters.

Liked it? Take a second to support Matt on Patreon!
Become a patron at Patreon!