So after the boatyard and sidney spit I ended up in Cadboro Bay for a couple of nights, while I finished my last week of work.

This wasn’t a great couple of days, as the anchorage was very rolly and I had to row ashore each morning, drag the dinghy up the beach hide it in a bush and then get on two buses in order to get to work. Barf. Finally, on Thursday I could move my boat back down to the inner harbour, as part of swiftsure. I did this before work on Thursday and had a thoroughly miserable motor into 20 knots of wind and 2.5 knots of current. Ugh. Nice to be back downtown though!

On the Friday, I spent a good couple of hours with Emma’s help talking off a bunch of stuff from Gudge in an attempt to make the transition to ‘raceboat’.  I also made up a new backstay tensioner using a piece of spectra I long-spliced at each end. Oh,and it was also my LAST DAY OF WORK. AMAZING!

This replaced a rather knarly looking wire crimp I’d done a while ago

And the final thing looked pretty great!

Later on Friday night a bunch of my friends turned up and we partied with all the other boats while the crew of me, Emma, Eric and Mal met and talked a bit about the next day.

Wasn’t a super late one as we all wanted to get rested before the race!

So race day, and we motor out with all the other boats

And then the start sequence begins. Now, due to me completely getting confused where the start line was it was at an angle), around 1.5 knots of adverse current and a wind hole, we ended up crossing the line 20 minutes after our start. Oops.

Well that was embarrassing. Once we got across the line, we managed to actually start making some good progress and flew through the water, beating into 10-15 knots. Here is a photo of the me eating a sandwich and squinting at the sun (I really need to get some sunglasses)

This continued pretty good until the wind started picking up even more, until it was 15 true, gusting higher – and with some chop that started getting pretty nasty

It was weird, where we had high wind speeds but I didn’t want to flatten the sails too much else all the swell would have stopped us dead – we needed the power to push through.

This continued to increase up until the anchor decided to come off the anchor roller, needing me to go forward, lift it back on and then lash it down, all at an angle of 30 degrees and getting absolutely soaked.

This was shortly followed by the tack line snapping – this was a piece of spectra I had knotted a while back and kept meaning to replace, but hadn’t. This caused the bottom of the sail to flog a ton, ripping the luff tape a bit and then sending the lazy sheet overboard where it got wound around the free-wheeling prop shaft. Doh!

At this point it was gusting over 25, 4-6 foot steep chop that we were launching over the top of, a tear in the foresail and the sheet was caught so I made the decision to quit. We radioed in and then tuned for home, having a lovely downwind sail with just the double reefed main, we were still hitting 7/8 knots.

Here is where we were when we quit – as you can see we’d managed to make up a bunch of ground!

We sailed back in just under 3 hours while managing to free the prop, meaning we didn’t need a tow, we got back in time for dinner and it gave us chance to talk through what happened.

Here is the broken spectra

It broke right at the bottom knot – always splice your synthetics kids!

Anyway, I got to stay in the inner harbour for the next two nights which was nice as we then had to LOAD everything again!

Many thanks to Emma’s mum Susan for making a bunch of the food, Emma for helping me load and unload everything and Eric and Mal for coming along! I’m now 0 for 2 in swiftsures (and 1 for 3 overall in races) but every time I learn something new – and it’s a very unique experience!

 

Liked it? Take a second to support Matt on Patreon!
Become a patron at Patreon!